Language

Press Brake
Shearing Machine
Fiber Laser Cutting Machine
Hydraulic Press
Press Brake
Fiber Laser Cuttting Machine
Crowning System

HIGH PRECISION & ADAPTIVE CROWNING SYSTEM

CNC crowning ensures a constant bend angle across the full length of the machine. This is achieved by preloading the machine, to offset any possible deflection under load or compensate for any tool wear, so that under load contacting surfaces are parallel to each other.
 
With CNC crowning systems the press brake control is preprogrammed with machine characteristics and deflection data. With manual crowning a simple spread sheet or chart can be easily developed for each application.
HomeCrowning System

Crowning System

  • Deflection Compensation Workbench

    Its feature is that the workbench body is divided into a cover plate and a base, with rectangular grooves on the base. Multiple groups of inclined blocks are installed in the square groove. Motor or manual adjustment is used to adjust the inclined block groups at different angles in the workbench. The deflection compensation curve is formed in the length direction, and the deflection compensation is automatically adjusted within the overall length of the Press brake. The CNC (electric) deflection compensation workbench can automatically transmit the displacement signal of the inclined block group to the CNC system of the machine tool through a displacement sensor.

  • RAYMAX PPO Family CNC Crowning

    The RAYMAX Pro Adaptive CNC Crowning system enables the user to offset deformations of the beam while bending. thus, the angle is keeping constant along the entire plate length.

    Advantage

    Easy reversibility of tools because of symmetrical adaption

    Hand crank with digital readout or CNC electric drive connected direct to the machine

    Hardened to 28-32 HRC which makes it substantially tougher than the competition

    Micro crowning every 200mm

    T & Y adjustable 0-0.76mm (0-0.030")

  • Wila Tool Holders And Crowning System

    This WILA system enables the user to offset deformations of the beam while bending. Thus, the angle is keeping constant along the entire plate length.

    Advantage

    Easy reversibility of tools

    Hydraulic Clamping

    Quick clamping for the dies

    Standard

    Tool slot CNC-Deephardened

    Drive unit CNC, Motor at one end

    Designed for press brakes with UPB-II hole pattern

Free to contact us